Some drives are slightly longer than average, and if you push them in fully without looking first, you may damage something in the case or on the motherboard. If the drive won't easily slide in all the way, check to see what's blocking it. In other cases, it may be necessary to slide the drive in from the back or remove the front bezel from the case.īe careful not to catch the drive's faceplate against the bezel of the case, or you may mar or damage the drive or the case.ĭon't push too hard. The drive is simply slid back into the case until its faceplate is flush with the front of the panel, and then is secured using screws. In most cases, the optical drives are secured directly to the case using screws. It may or may not require removing the plastic bezel from the front of the case. Removing or installing front-accessible drives usually is easiest to do from the front of the computer. If you're building a new computer or installing a CD or DVD drive where there wasn't one before, installing the new drive is the next step. If you're replacing a failed CD or DVD drive, removing the failed drive is the next step. The process shown here will also work when installing a device like a card reader, except that there may be an additional connection to the USB header on the motherboard or to an add-on card. Other than for connecting the cables, the process is basically the same. SATA wasn't yet in wide use back then when these pictures were taken. This demonstration was photographed using a CD-RW drive on a PATA interface. When replacing a DVD, DVD-RW, or other optical drive, make sure you buy the right kind. If they look like the connectors on the bottom drive, it's a PATA optical drive.
Or to put it more simply, if your failed CD-RW or DVD-RW drive has connections that look like the top drive in the picture, it's a SATA optical drive. SATA (serial ATA) drives have two tongues of conductors, the smaller of which is for the data cable and the larger of which is for the power cable. They are now obsolete, and replacements are hard to find. PATA (parallel ATA) drives have two rows of pins for the ribbon data cable, and a row of four larger pins for the power connector. The easiest way to tell what kind of interface a drive has is simply to look at the connectors. In that context, it also makes sense to review the two kinds of drive interfaces because some visitors may be replacing older PATA optical drives. If the folder does not exist select Yes.On the other hand, my site stats suggest that a lot of people land on this page because they want to replace a failed CD or DVD device so it does serve a purpose.Select the folder you want to install(normally it goes to default in C:\Dell\, see sample Figure 4).Click continue when extract pop up appears (see Figure 3).Select Run autoRcd.exe when AutoPlay appears (see Figure 1).
#Install dvd cd drivers
#Install dvd cd windows
Sometimes, Windows includes drivers for devices, but generally drivers need to be downloaded and installed separately. Devices such as video cards, sound cards, and modems all require drivers to function correctly within Windows.
#Install dvd cd driver
Best practice for driver downloads now however is to visit the Dell Driver and Downloads page for your system as the latest versions will all be hosted on this site.Ī driver is a piece of software that allows Microsoft® Windows® (or another operating system) to communicate with the hardware devices in your system.
0 kommentar(er)
